81
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
From CMS:
On the Navigation Tree, click
CMS
.
In the Work Area, click
Profile
>
E7/E5-48/E3-48C >
Service
>
Tagging
>
Match Lists
.
Locally on E7:
On the Navigation Tree, click
E7
.
In the Work Area, click
Profiles
>
Service
>
Tagging
>
Match Lists
>
Profiles
.
The table of the previously created match lists appears.
3.
Double-click the row that shows the match list in which you want to add a rule.
4.
In the menu, click
Create
and select the type of rule:
Tagged Match Rule
Untagged Match Rule
5.
If you chose to create a tagged match rule, do the following:
a.
In the Outer Tag list, select one of the following:
Enter value
and then enter the VLAN ID of the outer tag that can be specified
by name or by numeric VLAN ID, which ranges from 1-4095.
untagged
indicates that only untagged traffic should be matched.
ignore
indicates that the VLAN ID should not be examined.
b.
In the Outer P-bit list, select one of the following:
pbit value (range 0-7) that specifies the VLAN priority value to match.
pbit-none indicates the P-bit value is not considered. If this parameter is not
specified, "pbit-none" is the default behavior.
c.
Click
Create
.
6.
If you chose to create an untagged match rule, do the following:
a.
In the Source MAC list, do one of the following:
Enter the source MAC address (six hexadecimal digits in the range 0-FF,
optionally separated by colons).
Leave the "ignore" to leave blank.
b.
In the Source MAC list, do one of the following:
Select Enter Source MAC Mask, and then enter the source MAC mask (six
hexadecimal digits in the range 0-FF, optionally separated by colons).
Select oui to mask the OUI fields.
Select none to ignore.
