56
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Port status indicators
Each interface port on an E7-2 line card has an LED located below its module socket to
indicate port status. (E7-2 cards contain a mix of some or all port types listed below).
LED
Port
Color
Status
Description
XFP
(1, 2)
10GE
Green
On
Indicates that an Ethernet link has been established
Blinking
After module insertion, blinks (3) times to indicate the inserted
module is recognized and allowed to operate
Blinks at variable speeds to indicate the link is
transmitting/receiving traffic
SFP+
(1, 2)
Off
Socket is vacant or an invalid module is inserted
Red
On
Indicates a module has been inserted into a 10GE socket that is
directed to the backplane for connectivity between two cards
(Applies to
XFP 2
and
SFP+ 2
only)
SFP
(1–12)
GE
Green
On
Indicates that an Ethernet link has been established
Blinking
After module insertion, blinks (3) times to indicate the inserted
module is recognized and allowed to operate
Blinks at variable speeds to indicate the link is
transmitting/receiving traffic
Off
Socket is vacant or an invalid module is inserted
GPON
(1–4)
GPON
Green
On
Indicates that at least one ONT is in service on the PON
Blinking
After module insertion, blinks (3) times to indicate the inserted
module is recognized and allowed to operate
Blinks steadily while the first ONT on the port is ranging
Off
Socket is vacant or an invalid module is inserted
Summary of Contents for E7-2
Page 1: ...Calix E7 2 Installation Guide May 2013 220 00320 Rev 13...
Page 2: ......
