127
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
To select a battery profile
1.
From the ADMIN menu, choose
>PRESET
.
2.
Press the MENU button once. The controller should display LMP.
3.
Press the UP button until the appropriate battery profile (LMP, NiCAD, or VRLA)
displays.
4.
Once the appropriate battery profile is selected, press MENU for 5 seconds until the
menu jumps back to
CHOOSE:>CONFIG
.
5.
Press the UP button once to display
CHOOSE:>EXIT
.
6.
Press the MENU button to return to the basic menu.
Changing rectifier settings
You can verify or change the rectifier settings from the SETPOINT submenu.
To modify rectifier settings
1.
From the Administrator menu, choose
>SETPOINT
.
2.
Press the UP button to toggle through the features on the SETPOINT submenu. Each
feature can be enabled or disabled by pressing
MENU
. On each feature with adjustable
voltage or amperage, you can adjust the value by pressing MENU, then adjusting the
value with the UP/DOWN buttons.
3.
Modify the settings per your application requirements.
4.
Press the UP button until
>EXIT SETPOINT
displays. Press the MENU button to
exit.
