50
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
Installing the Cabinet Ground Connection
The cabinet's connection to the earth ground circuit must be in place before you install
power to the cabinet.
To install the cabinet ground connection
1.
Open the splice compartment door.
2.
Route the earth ground wire to the main ground bar (located at the bottom of the
compartment) and cut the wire to length.
3.
Using a crimp tool, attach a two-hole compression lug (#2 AWG, 3/4-inch hole spacing)
to the earth ground wire.
4.
At the middle of the ground bar, locate a ground position with 3/4-inch stud spacing.
Remove the nuts from the identified terminal studs.
5.
Attach the earth ground wire's two-hole lug onto the 3/4-inch ground terminal studs.
6.
Re-connect the nuts to the ground terminal studs and tighten to 26 inch-lbs. of torque.
