71
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
4.
Place up to six battery strings into the battery compartment, arranged as shown.
5.
Install the jumper straps between the terminal posts of the batteries in each string per the
manufacturer instructions.
6.
For each battery string, connect the battery power cables as follows:
a.
Remove the protective rubber caps from the cable ring lugs.
b.
Attach the black cable to the positive (+) terminal post at the positive end of the
string.
c.
Attach the red cable to the negative (-) terminal post at the negative end of the string.
d.
Tighten the nuts on the terminal posts to the torque specified by the manufacturer.
