94
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
d.
Route the other end of the conduit to the fiber distribution system or to the
equipment as required.
e.
Dress and secure the fiber conduit in place as required. Ensure that the conduit does
not get pinched, kinked, or stretched by the swinging equipment racks when opened
or closed.
To install a splice tray
1.
Unpack the splice tray from the shipping packaging.
2.
After splicing fibers, place the splices into the splice tray as follows:
a.
Open the plastic cover on the splice tray.
b.
Arrange the splices and slack fiber in the splice tray.
c.
Close the splice tray cover.
3.
Slide the splice tray into any open position in the splice tray holder. Secure the tray in
place using the supplied Velcro strap or a cable tie.
4.
Route the fiber pigtails from the splice tray through the fiber routing conduit to the
distribution system or the equipment.
