7.2
Communication Software
Customer can use any serial terminal program in PC to communicate with modem. We have used “rsterm” for
our development and test. Below figure shows typical screen shot of rsterm.
Customer can use either AT commands or program the GL86x module with Python script defined by Telit.
Some of the documents to be referred are:
1.
Telit Modules Software User Guide_r13 (1vv0300784 Rev.13 2013-02-14)
2.
Telit AT Command Reference guide_r16 (80000ST10025a Rev.16 -2013-02-07)
3.
Telit Easy Script Python_r15 (80000ST10020a Rev 15 -2012-10-09)
4.
Telit CMUX Implementation User Guide_r3 (1VV0300994 Rv0.3 – 2013-02-15)
5.
Telit SIM Access Profile User Guide_r3 (80000ST10029a Rev.3-2011-03-01)
6.
Telit IP Easy User Guide_r15 (80000ST10028A rev 15-2013-02-19)
