Tel: 0115 940 0905 Fax: 0115 987 0333
www.callaiduk.com sales@callaiduk.com
50 Cornhill Road, Carlton, Nottingham, NG4 1GE
2050 Disabled Toilet
Alarm Kit
Installation guide
The 2050 disabled toilet alarm kit is simple to
install using 4-core alarm cable. The 12v PSU
allows only low voltage inside the toilet area.
Please follow the simple wiring diagram that
can be downloaded from the web page.
Additional parts can be purchased for larger
toilets.
Positioning the components
It is important to ensure that the positioning of
the call/reset unit & the ceiling mounted pull
switch cords are placed within easy reach of
the user. A crucial point to remember is that
many wheelchair users cannot turn round.
Therefore do not fit the pull cords behind
them. Ideally pull cords should be on a line in
front of the toilet pan, see the illustration
below.
For safety reasons the 240V/12 Volt
transformer is supplied separately as this
should be fitted above the ceiling tiles. This ensures
that only low voltages are connected to the
equipment in the toilet area.
Full installation information is supplied with the kit.
For multiple toilet sites central indicator panels may
be required, such as Hospitals, Gyms, Schools,
Hotels and Holiday Camps etc.
2050 Disabled Toilet Kit Wiring Overview
1114 Ceiling Mounted Pull Switch
1110 Over Door Indicator Lamp
ASSIST
RESET
12-24V PSU
2050 Call/Reset Unit
4 Core Alarm Cable
1117 Alarm indicator Panel For multi toilet
installations
Relay Switched
output for third party
systems
Engraved name
inserts can be fitted
Digital panels also
avalible
PSU
PAN IC
PAN IC
