BA-ORTHO_EN V2.0
Seite: 11 von 19
6 Commissioning
6.1 Initial Commissioning
The device should acclimate for one hour before the first commissioning.
The treadmill has to be run in slowly after longer times out of business.
The On-Switch is located at the back of the device. It is designed to switch the power on only. While
switching the device on, the user may not stand on the treadmill.
There are
control buttons at the devices display. These are sensitive and don’t need force to be used.
Turn off using the “OFF”-button.
6.2 Power supply
The treadmill has to be connected with it’s power cable to the grid at (220-230V). Use the electric connector
only with a socket providing this currency. The socket has to be secured by a time delay fuse (16A). You
may not place the device above any cables or wiring leading currency.
6.3 Warning notices
The device must not be used without supervision, or an instruction of one of the following persons: Sports-
teacher, physiotherapist, medical Staff. If an independent use is possible depends on the reliability and
experience of each user.
Before each training make sure that the adjustable p
arts of the device are fixed and won’t protrude over the
running surface.
If you encounter sickness or giddiness you have to stop the training immediately and consult/visit a doctor.
