GPS Tracker Position
- make sure that the label is facing the right direction (e.g. if the label on the unit says,
“Label side down”, then the unit should be installed so that the Label side faces down
- GPS unit needs access to GPS signals, so make sure that the install position provides this
access
Additional Check (Optional)
Connect the white cable (ignition sense) to the power supply for a few minutes. This will
simulate the condition of the engine being turned on and the GPS tracker will update every
minute. When this is done, the device location will be instantly updated on the web portal.
Do not leave the white cable permanently connected to the power supply as it will
drain vehicle battery when not running.
LED
Description
Status
GSM Cellular Blue
Searching for GSM Network Blinking once a second
GSM Lock
Blinking once every 3 second
GPS Green
Searching for satellite
Solid
GPS Lock
Blinking