Log Into Your Account
Your login details will be mailed to you. Using the account login and password, log on to
your account. Once the blue status LED is blinking once every three seconds, the device will
shortly start transmitting information to the host server (it transmits once every minute
when vehicle is running and every 2 hours when not running) and you can see all the logged
information.
After installation if the unit is not updating:
Make sure the blue LED on the unit is blinking at the rate of once every 3 seconds (as
described on page 1)
If the blue LED is blinking at the rate of once every 3 seconds, then start the vehicle
engine and keep the engine running for a few minutes to get a quick update. When the
engine is off, the web platform updates at once in 2 hours and when the engine is on,
the update rate is once every 1 or 2 minutes
If the engine is on and the web platform is updating at once every 2 hours, then the
ignition sense wire (white cable) was not connected. This needs to be connected for for
real time update (at 1 minute interval).
If all of the above were followed, and the unit still does not update, contact support
