Page 2
Page 3
CONTENTS
PAGE
INTRODUCTION
3
CHECK LIST
3
APPROVALS
3
CONSTRUCTION
4
INSTALLATION
4
LOCATION
4
COLD WATER INLET
5
DIMENSIONS AND WEIGHTS
5
VENT / OVERFLOW
6
ELECTRICAL CONNECTIONS
6
USER INSTRUCTIONS
6
SCALE
7
GENERAL OPERATION
8
GENERAL NOTES
8
CLEANING
8
SERVICE INSTRUCTIONS
9/10/11
EXPLODED DIAGRAM
12/13
ACCESSORIES
14/15
SPARE PARTS
16/17
WIRING DIAGRAM
18
TROUBLE SHOOTING
19
WARRANTY
20
SERVICE & MAINTENANCE HISTORY
21/22/23
PRODUCT SPECIFICATION
24
INTRODUCTION
Thank you for purchasing a Calomax Compact boiler. All our products are
designed to give years of simple, reliable operation. To ensure this, it is
important that the installation and subsequent servicing is carried out by a
suitably qualified engineer in accordance with these instructions.
For assistance in finding a suitable engineer in your area, visit our website
www.calomax.co.uk, contact our service department on 0113 249 6681 or
e-mail: service@calomax.co.uk
CHECK LIST
Before commencing installation, check that the following parts have been
supplied with the boiler:
1. 4 off wall fixing screws and plugs.
2. 1 off solenoid adapter.
3. 1 off 15mm pipe elbow.
4. 1 off 15mm straight pipe fitting.
5. 1 off status label
This product conforms to the CE marking directive 93/68/EEC
through compliance with the following standards:
Electromagnetic Compatibility Directive
Low Voltage Directive 73/23/EEC in accordance with:
BS EN 60335-2-63:1993
Compliance with these standards has been confirmed through testing by
an independent NAMAS approved body
Calomax products have been tested and found to comply with the
requirements of the Water Supply (Water Fittings) Regulations 1999
for England and Wales Water Bylaws 2000, Scotland and the Water
Regulations Ireland.
APPROVALS