Electrical Requirements
Electrical Shock Hazard
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
•
Any additions, changes or conversions
required in order for this appliance to
satisfactorily meet the application needs must
be made by a qualified service technician in
accordance with the manufacturer’s
instructions and all codes and requirements of
the authority having jurisdiction. Failure to
follow the instructions could result in serious
injury or property damage. The qualified
agency performing this work assumes
responsibility for the conversion.
•
This appliance is not supplied with a plug.
If you wish to install this appliance with a plug,
it must installed by a qualified service
technician. The plug must be a 4-prong, 3-
phase plug that is designed specifically for
freestanding ranges.
•
This appliance can be installed directly to
the main (without a plug). To do so, follow
instructions in the “Electrical Connection”
section. If you wish to install this appliance
directly to the main (without a plug), it must be
installed by a qualified service technician.
•
DO NOT
operate this appliance using a
2-prong adapter or an extension cord. If a 2-
prong wall receptacle is the only available
outlet, it is the personal responsibility of the
consumer to have it replaced with a properly
grounded 4-prong wall receptacle installed by
a qualified electrician.
•
Severe shock, or damage to the range
may occur if the range is not installed by a
qualified installer or electrician.
•
It is
220-240V/50-60Hz.
With
recommendation to connect to a
50 Amp
power supply.
•
Total Input Power is 11.7kw (48.75A). A
dedicated circuit, protected by a minimum 50
amp time delay fuse or circuit breaker is
required.
•
For personal safety, the appliance must
be properly grounded.
•
See the “Installation Instructions”
packaged with this appliance for complete
installation and grounding instructions.
13
