background image

Power Cord Safety

  

Do not put

 

detergents or

 

flammable

 

materials

 

in

 

the equipment

 

installed

 

under

 

the cooktop

Extreme caution must be used when 
moving an appliance containing hot oil 
or other hot liquids.
While cooking any overflowed fat or oil 
on the cooktop may ignite. There is a 
risk of burning and fire; therefore, 
control the cooking process at all times.
The use of accessory attachments not 
recommended by the appliance 
manufacturer may cause injuries.
Items with a magnetic field such as: 
radios, televisions, credit cards, 
cassette tapes etc., can affect the unit.
The marked electrical rating should be 
at least as great as the electrical rating 
on the appliance.
To prevent accidents and achieve 
optimal ventilation, allow for sufficient 
space around the cooking area.

Environment of Unit 

 

 

CAUTION

WARNING

WARNING

3

Important

 

Safety

 

Instructions

 

                           Do not store items of 
interest to children in cabinets above 
the range or on the backguard of a 
range - children climbing on the range 
to reach items could get seriously 
injured.
Use proper cookware size - This 
appliance is equipped with four for five 
Cooking Elements of different sizes. 
Choose cookware with a flat bottom 
large enough to cover the unit heating 
surface. The use of undersized 
cookware will expose a portion of the 
heating surface where direct contact 
may be made and cause serious injury. 
Compatible cookware will improve 
efficiency.
To reduce risk of burns, ignition of 
flammable materials, and spillage due 
to unintentional contact with cookware, 
the cookware handles should be turned 
inward and not extend over adjacent 
heating surface.
Wear proper apparel - loose fitting or 
hanging garments should never be 
worn while using the appliance.

Unplug from outlet when not in use and 
before cleaning. Allow to cool before 
performing any maintenance or repairs.
Always attach plug to appliance first, 
then plug cord into the wall outlet. To 
disconnect, turn any control to off, then 
remove plug from wall outlet.
The cord should be arranged so that it 
will not drape over the countertop 
where it can be pulled on by children or 
tripped over.

                              To protect against 
electric shock, do not immerse cord, or 
main body in water or any other liquid.
Do not let cord hang over edge of table 
or counter.
Do not allow cord

 

to touch hot surface

.

A short power supply cord or 
detachable power supply cord should 
be used to reduce the

 

risk of becoming 

entangled in or tripping over a longer 
cord.

 

Summary of Contents for CICT244


























Reviews: