LTR20231170
9/23/2023
www.calspas.com
12
FLIP SCREEN
Additional Programming
The display on the control panel of the chill spa can be flipped to be controled from the inside of the spa. To flip
the display press the
button and the
“SET”
button at the same time. To flip it back press the same two
buttons together again.
MENU NAVIGATION
The control system inside of the Chill Spa has several menu options that do not apply to the operation of the
chill spa. This is due to the contruction and design of the chill spa. If accidental activation of an option occurs,
you can use the
key to find option
“CAnC”
and press set to revert to previous settings. you may also wait
until the display times out and return to its default temperature display.
The Unused software settings include:
FP1, FP2, FP3, FP4, FP1d, FP2d, FP3d, FP4d, CLdn, ECL, CHCL, Uto, PUF,
and CALb.
Many of these modes do not apply for the Chill Spa: If accidental activation occurs scroll to the CAnC option
and press set to cancel any modifications done.
Condensation Drainage
The Chill Spa has an external drain for collected condensation from within the chiller. Accumulation
of water near the drain, or the base of the spa is considered normal. The amount of collected
condensation may vary based on ambient temperture and weather.
