in a visible area within 1 meter range.
②
Make sure the Bluetooth remote controller is in power off
state.
③
In USB charging power off state press and hold
PTT Button
for about 8 seconds or in power on idle state press and hold
PTT Button
for 16 seconds, when the Blue LED and the Red LED flashing alternately, release the
button then the AH300 remote controller is in pairing state.
④
Follow the user manual of your mobile phone, turn on the Bluetooth function, and searching
the PTT remote controller devices
⑤
From the found devices in your mobile phone, select the device with
“
AH300
”
related name
and thentry to pair with it, when it prompts to enter password, enter pin code
<0000>
. Once
paired successful, LED Indicator will exit Blue/Red alternately state to indicate the Bluetooth
remote controller has connected with your mobile phone. Now you can use the remote
controller to push to talk.
Note: 1. Password code may be not necessary for some mobile phones.
2. The pairing will be remembered after the first pair, so when you second or next time
use the device, do not need to pair again.You need to lightly click the PTT Button once if the
device haven
’
t connect immediately.
Push To Talk Function
After connected to your Bluetooth adapter, just push the PTT button to remote control the PTT
function.
①
After connected to your cell phone Poc(Ptt Over Cellphone) app, just push the PTT button to
remote control the PTT function. Some Poc app may need some setting change to Bluetooth
before use. Details please refer to the user guide of Poc App.
Note: Poc means PTT Over Cell Phone.
