Manuale Uniflam Idro rev. 00
23
5. Leave open the air flow windows as long as needed to increase the flame.
6. To inflame the wood one can use paper or special sticks for inflammation.
7. Now proceed with the regulation of the air windows in terms to give just as much air as needed
to feed the flame.
WARNING: During the first times of heating avoid too strong flames in order to give the metal
frame the èpossibility to stabilize itself without suffering excessive expansion.
WARNING: the first starts of the stove could be accompanied by the leakage of smoke and smells
from the painted parts of the product. These small inconveniences are inherent to the process of
chemical stabilization of the special colours used. Therefore in this moment it is necessary to
ventilate the room well.
Our stoves are designed to burn only wood.
WARNING: Do not feed our heat generator with any liquid or solid fuel different from wood.
Please note that the misuse of the product can cause malfunctioning that may causes damage to
the product or also injuries to persons.
WARNING: Any failure of following the instructions for installation and operation listed in this
manual, may result in the loss of warranty.
The burning hours reported in the tables of the main technical features of our stoves are
indicative. It is clear that an increased energy demand implies also a higher consumption of fuel.
WARNING: Although the surface temperatures reached by our products are not very high, one
should pay attention touching the surface during the functioning of the stove.
