9. General information
9.1. General recommendations
The Ultrasonic Portable has been calibrated with accuracy,
following the same calibration standards for each unit.
Regarding how to mount the unit
As we described before, you have to prepare the mast
head for the mechanical installation. Align the North mark
of the Ultrasonic in order to have it heading to the bow.
Then install the sensor in a location free from wind pertur-
bation, usually on the mast head.
Other important aspects
·Do not attempt to access the transducer area with your
fingers.
·Solar panel comes with a protective film bulit-in. Do not
remove the film, as it will damage the cell.
·Do not attempt any modification to the unit.
·Never paint any part of the unit or alter its surface in any
way.
If you have any questions or doubts, please contact us
directly. We will be glad to assist you in any time.
C/ Alfonso Solans Serrano, 20
Local 12
50014 Zaragoza
Spain
Telephone number: +34 876 45 48 53
E-mail: sales@calypsoinstruments.com
Calypso Instruments is a Trademark of
Prodeo Ingeniería y Consultoría
9. General information
(continuation)
9.2. Maintenance and repair
The ultrasonic does not require great maintenance thanks
to the lack of moving parts in this new design.
The only maintenance you have to do is to clean the solar
panel with a wet tissue a few days before using it and
place it in a light source / solar to get the battery full of
charge.
Before using it, make sure that the device has enough
battery to work without problems. You can get that infor-
mation directly through the application.
Transducers must be kept clean and aligned. Impacts or
incorrect impulsive handling may lead to transducers
misalignment.
The space around the transducers must be empty and
clean. Dust, frost, water, etc... will make the unit stop
working.
Rinse with freshwater and let dry.
9.3. Warranty
Warranty is void in case of not following the instructions of
use, repair or maintenance without written authorisation.
This product is for leisure purposes exclusively. Any wron-
gful use given by the user will not incur in any responsibility
on part of Calypso Instruments. As well, any harm caused
to ULTRASONIC PORTABLE by accident will not be covered
by the waranty. Using assembly elements different from
those delivered with the product will void the warranty.
Changes on transducers position/alignment will void any
warranty.
For further information please contact Calypso Technical
Support through
aftersales@calypsoinstruments.com
or visit
www.calypsoinstruments.com
.
Calypso Instruments team thanks you for your confidence in our
product.
10/13
11/13
ULTRASONIC Portable
User manual
