18
3
Wizard & Main Interface
3.1 Startup Wizard
The disk icons will be shown on the top
of the startup interface. You can view
the number and status of each disk
quickly and conveniently through these
icons ( : no disk; : unavailable disk;
: RW available disk).
You can quickly configure the DVR by
wizard setup to make the DVR work
normally. You must configure the wizard
if you start the DVR for the first time
(or click “Skip” to cancel the wizard next
time).
Click “Wizard Setup” to start wizard. The
setting steps are as follows.
1.
System Login.
Set your own
password or use the default when
you use the wizard for the first time
(the default username of the system
is
admin
and the default password
of admin is
123456
); select the
login username and enter the
corresponding password next time.
Click “Edit Security Question” to set
questions and answers for password
security of admin. If you forget the
password, please refer to Q4 in
Appendix A FAQ for details.
Click “Next” to continue or click “Cancel”
to exit the wizard.
2.
Date and Time Configuration.
The
date and time of the system need to
be set up if you use the wizard for
the first time. Refer to the following
figure. Set the time zone, system
time, date format and time format.
The DST will be enabled by default if
the time zone selected includes DST.
Click “Next” to continue.
3.
Network Settings.
Check “Obtain an
IP address automatically” and “Obtain
DNS automatically” to get the IP
address and DNS automatically (the
DHCP function of the router in the
same LAN should also be enabled), or
manually input them. Input the HTTP
port, RTSP port and Server port
(please see 11.1.2 Port Configuration
for details). Click “Next” to continue.
Summary of Contents for CS-DR8900
Page 68: ...68...
