31
PTZ
and then the image size will be doubled
and centered on the clicked point.
Press and hold the left button of the
mouse on any area of the camera image
to zoom in the image; press and hold the
right button to zoom out the image.
Move the cursor of the mouse to the
camera image and then slide the scroll
wheel of the mouse forward to zoom in
the image, slide the scroll wheel of the
mouse backward to zoom out the image.
OSD Setting
Go to PTZ protocol setting interface and
then set the protocol to COC before you
call the OSD. Click “OSD” to go to camera
OSD setting interface. Click
to
start OSD setting. The meanings of the
buttons are shown in the table below.
Button
Meaning
The OK button; you can click it to
start OSD.
Click it to change the menu mode or
decrease the menu value.
Click it to change the menu mode or
increase the menu value.
Click it to go to the previous menu.
Click it to go to the next menu.
Preset Setting
Click “Preset” to go to preset operation
tab and then click “Add” button to pop
up a window as shown below. Select the
preset and then input the preset name
in the window; finally click “OK” button
to save the settings. You can add 255
presets for each dome at most.
Adjust the dome’s direction and then
click “Save Position” to save the current
preset position (you can also click
another preset in the preset list and
then save the preset position after
adjusting the dome’s direction); click
in the preset list to call the preset; click
“Delete” button to delete the selected
preset.
You can also go to preset setting
interface for preset setting, see 6.2
Preset Setting for details.
Cruise Setting
Click “Cruise” to go to cruise operation
tab and then click “Add” button to pop up
a window as shown below left. You can
add 8 cruises for each dome at most.
1. Input the cruise name in the “Add
Cruise” window and then click “Add
preset” to pop up the “Add Preset”
window (Before adding preset to
the cruise, please add preset of the
dome first).
2. In the “Add Preset” window, select
the preset name, preset time and
preset speed and then click “OK”
button.
3. In the “Add Cruise” window, you can
click
to reselect the preset, then
change the preset time and speed.
Click
to delete the preset. Click
“Add” button to save the cruise.
6 PTZ
Summary of Contents for CS-DR8900
Page 68: ...68...
