32
Click
to start the cruise and click
to stop the cruise in the cruise list
of the cruise operation tab; click “Delete”
button to delete the selected cruise.
You can also go to cruise setting
interface for cruise setting, see 6.3
Cruise Setting for details.
6.2 Preset Setting
Click Start
Settings
Camera
PTZ
Preset to go to the interface as
shown below.
Add preset
Select camera and then click “Add”
button to add preset; or click
in
the camera list on the right side of
the interface to display the preset
information of the dome and then click
to add preset. The operations
of the “Add Preset” window are similar
to that of the PTZ control interface;
please see 6.1 PTZ Control Interface
Introduction for details.
Edit preset
Select camera and preset. You can input
the new name of the preset and then
click
to save the new preset name.
Adjust the rotating speed, position,
zoom, focus and iris of the preset and
then click “Save Position” to save the
preset.
Delete Preset
Select camera and preset and then click
“Delete” to delete the preset.
6.3 Cruise Setting
Click Start
Settings
Camera
PTZ
Cruise to go to the interface as
shown below.
Add Cruise
Click
in the camera list on the right
side of the interface to display the
cruise information of the dome and
then click
to add cruise. The
operations of the “Add Cruise” window
are similar to that of the PTZ control
interface; please see 6.1 PTZ Control
Interface Introduction for details.
Edit Cruise
Select the camera and cruise in the
“Cruise” interface. Input the new cruise
name and then click
to save the
cruise name. Click “Add Preset” to add
preset to the cruise. Click
to delete
the preset from the cruise. Click one
preset in the preset list and then click
to move down the preset and click
to move up the preset. Click
to
start the cruise and click
to stop it.
Delete Cruise
Click
in the camera list on the right
side of the interface to display the
6 PTZ
Summary of Contents for CS-DR8900
Page 68: ...68...
