37
Go to “Edit Schedules” interface and
then click to edit the schedule. The
settings of “Edit Schedule” are similar
to that of the “Add Schedule”. Click to
delete the schedule.
7.4 Record Mode
7.4.1 Manual Recording
Method One: Click on the tool bar at
the bottom of the live preview interface
to enable recording of the camera.
Method Two:
Go to live preview
interface and then click the right-click
menu “Manually Record On” in the
camera window or click
on the tool
bar under the camera window to start
recording.
n
Note:
Click Start
Settings
Record
Mode Settings and then
set the manual record time in the
interface. Click “Apply” to save the
settings.
7.4.2 Timing Recording
Timing Recording:
the system will
record automatically according to
the schedule. Set the timing record
schedule of each camera. See 7.3
Schedule Setting for details.
7.4.3 Motion Based Recording
Motion Based Recording: the system
will start motion based recording when
the motion object appears in the setup
schedule. The setup steps are as
follows:
1. Set the motion based recording
schedule of each camera. See 7.3
Schedule Setting for details.
2. Enable the motion and set the motion
area of each camera. See 9.2.1
Motion Configuration for details.
The camera will start motion based
recording once you finish the above
settings.
7.4.4 Sensor Based Recording
1. Set the sensor based recording
schedule of each camera. See 7.3
Schedule Setting for details.
2. Set the NO/NC type of the sensor,
enable the sensor alarm and then
check and configure the “Record”.
See 9.1 Sensor Alarm for details.
7.5 Disk Management
Click Start
Settings
Disk
Disk
Management to go to disk management
interface. You can view the DVR’s disk
number and disk status and so on in the
interface. Click “Formatting” button to
format the HDD.
n
Note: 1.
The new HDD should be
formatted for normal use.
2.
For normal use of the HDD
which has been used in other DVR,
if the DVR is of the same model
with the new DVR, please import
the configuration file of the DVR to
the new DVR or format the HDD;
if the models of the two DVRs are
different, please format the HDD.
7 Record & Disk Management
Summary of Contents for CS-DR8900
Page 68: ...68...
