41
8.3 Record Search &
Playback
8.3.1 Search & Playback by Time-
sliced Image
1. Click Start
Search
By Time-
sliced Image to go to “By Time-sliced
Image” tab. There are two view
modes: by time and by camera. In the
time view mode, a maximum of 64
camera thumbnails can be showed.
If the camera thumbnail number is
more than 64, the cameras will be
listed directly by their camera name,
not the thumbnail. A maximum of
196 camera names can be listed. If
the camera name number is more
than 196, the time view mode will be
disabled and the camera view mode
will be available only.
2. Select one camera in the interface
and then click “Open” button.
3. Click the image box to play the record
in the small playback box on the left
side of the interface (the box which
has image inside indicates that the
record data exist).
4. Refer to the picture below. Drag the
color blocks on the time scale to
select the record data and then click
“Backup” button to pop up a window;
select the device, backup path and
backup format in the window and
then click “Backup” button to start
the backup.
5. Click “Playback” button to play the
record in the playback interface
(refer to 8.2 Playback Interface
Introduction for details). Click “Close”
to close the interface.
Time Slice Mode Selecting:
Method One:
Click “Year”, “Month” or
“Day” button under the record time scale
to select the time slice mode. In “Day”
mode, click
/
on the left/right side
of the time scale to view the record of
the last/next day; click “Minute” in the
“Picture” option under the time scale to
select “Minute” mode (in “Minute” mode,
click the time scale to change the time
of the 60 display windows) and click
“Hour” to select “Hour” mode.
Method Two:
Click
beside “Camera
Thumbnail” on the left top corner of the
interface to select the time slice mode.
Method Three:
Right-click the mouse on
any area of the time-sliced interface to
go back to the upper interface.
8.3.2 Search & Playback by Time
1. Click Start
Search
By Time to
go to “By Time” tab as shown below.
2. Click
on the bottom of the
interface to add playback camera.
Click “Modify” on the top right corner
of the camera window to change the
camera and click “Clear” to remove
the camera.
8 Playback & Backup
Summary of Contents for CS-DR8900
Page 68: ...68...
