Introduction
Instruction Manual, Feb-17
2
1
Introduction
1.1
Precaution
•
Please read this operating manual before starting the installation! This manual
contains information and warnings the user has to follow to ensure reliable
operation of the instrument
•
If the instrument is used in a manner not specified in this manual, the protection
provided by the equipment may be impaired
•
This sign indicates (on instrument and in this manual) that failure to take note of
the accompanying information may result in damage of the instrument
•
Attention: For safety reasons the instrument may only be used for the purposes
described in the operating manual
•
To avoid injury use adequate safety equipment (protective goggles, gloves etc. if
applicable) when working with the instrument
•
When working with the fluids of the instrument, be sure to take the appropriate
caution (protect your eyes from direct contact with liquid)
•
The instrument may be used only by properly trained laboratory staff
•
Use a damp lint free cloth for cleaning the instrument surface. Do not employ
aggressive detergents
•
Only authorized personnel may open the instrument. Service and repair is only to
be performed by trained specialists. Use spare parts and consumables supplied by
CAMAG only. The warranty is voided if parts from other sources are used. Check
the service manual before you start service to reduce product-specific risks
•
If the instrument is found to be defective, it must be switched off and steps must
be taken to ensure that it cannot be switched on by mistake
•
If liquids penetrate the inside of the instrument, the power has to be disconnected
immediately. Small amounts of liquid can be wiped off and/or dried by means of a
hairdryer, with larger amounts of liquid a service technician has to be called. A test
of functionality has to be performed in all cases
•
Carry out all safety checks and the preventive maintenance as recommended by the
manufacturer in order to assure your personal safety and the full functionality of
the instrument. Have an authorized service specialist perform any service not
described by this manual
•
See original manufacturers' manuals for further safety data on third party
equipment supplied with the system
•
The safety of any system incorporate with the equipment is the responsibility of the
assembler of the system
Summary of Contents for TLC-MS INTERFACE 2
Page 1: ...INSTRUCTION MANUAL TLC MS INTERFACE 2...
Page 27: ......
