cnMatrix EX1K Basic Configuration Guide
Copyright 2021 Cambium Networks. All rights reserved. (v1.2)
3
Default Configuration
When booting up for the first time the cnMatrix EX1K switch will try to acquire a dynamic IP address through DHCP.
If a DHCP Server is not present on the network, the switch will fall back to
192.168.1.1
static IP address on the In-
Band ports.
Note: DHCP is enabled by default on In Band Ports (VLAN1).
Default login information:
Username:
admin
Password:
admin
Configure Management PC
1
For Windows operating system, open the Control Panel window.
2
In the Control Panel window, select the View network status and
tasks option. The Network and Sharing Center window is displayed.
3
Click the Change adapter settings option. The Network Connections
window is displayed.
4
Double-click the interface connected to the switch. The interface
Properties window is displayed.
5
Double click on the Internet Protocol Version 4 (TCP/IPv4) option.
6
The Internet Protocol Version 4 (TCP/IPv4) Properties is displayed.
Select Use the following IP address.
Set The IP address of the interface to 192.168.1.10 and the Subnet
mask to 255.255.255.0