CAMBIUM NETWORKS
026v003
102
Connecting to the unit
To connect the unit to a management PC, use the following procedures:
on page
Connecting to the PC and powering up
on page
CONFIGURING THE MANAGEMENT PC
Use this procedure to configure the local management PC to communicate with the ePMP module.
Procedure:
1 Select Properties for the Ethernet port.
In Windows 7 this is found in Control Panel >
Network and Internet >
Network Connections > Local Area
Connection.
2 Select the Internet Protocol (TCP/IP) item:
3 Click Properties.
4 Enter an IP address that is valid for the
192.168.0.X network, avoiding:
192.168.0.1, 192.168.0.2 and 192.168.03
A good example is 192.168.0.100:
5 Enter a subnet mask of 255.255.255.0.
Leave the default gateway blank.
6 Click OK, then click Close
Summary of Contents for ePMP 1000
