CAMBIUM NETWORKS
026v003
248
Attribute
Meaning
DFS Status
N/A: DFS operation is not required for the region configured in
parameter Country Code
Channel Availability Check: Prior to transmitting, the device must check
the configured Frequency Carrier for radar pulses for 60 seconds). If no
radar pulses are detected, the device transitions to state In-Service
Monitoring.
In-Service Monitoring: Radio is transmitting and receiving normally
while monitoring for radar pulses which require a channel move.
Radar Signal Detected: The receiver has detected a valid radar pulse and
is carrying out detect-and-avoid mechanisms (moving to an alternate
channel).
In-Service Monitoring at Alternative Channel: The radio has detected a
radar pulse and has moved operation to a frequency configured in DFS
Alternative Frequency Carrier 1 or DFS Alternative Frequency Carrier 2.
System Not In Service due to DFS: The radio has detected a radar pulse
and has failed channel availability checks on all alternative frequencies.
The non-occupancy time for the radio frequencies in which radar was
detected is 30 minutes.
Contains FCC ID(s)
Displays listing of FCC IDs applicable to the device.
Read-Only Users
Displays the number of active Read-Only users logged into the radio.
Read-Write Users
Displays the number of active Read-Write users logged into the radio.
SM Current GUI
User Authentication
Displays the mechanism used for authentication of web management
interface users.
Factory Reset Via
Power Sequence
Enabled: When Enabled under Tools->Backup/Restore->Reset Via Power
Sequence, it is possible to reset the radio’s configuration to factory
defaults using the power cycle sequence explained under
ePMP to factory defaults by power cycling
Disabled: When Disabled, it is not possible to factory default the radio’s
configuration using the power cycle sequence.
cnMaestro
Connection Status
The current management status of the device with respect to the
Cambium Cloud Server. When Enabled under Configuration->System,
the device will be managed by the Cambium Remote Management
System, which allows all Cambium devices to be managed from the
Cambium Cloud Server.
cnMaestro Account
ID
The ID that the device is currently using to be managed by the Cambium
Cloud Server.
Summary of Contents for ePMP 1000
