CAMBIUM NETWORKS
026v003
251
Attribute
Meaning
Frequency Carrier (MHz)
The current operating frequency of the visible AP.
Channel Bandwidth
The current operating channel bandwidth of the visible AP.
RSSI (dBm)
The current measured Received Signal Strength Indicator at
the AP.
SNR (dB)
The current measured Signal-to-Noise Ratio of the SM to AP
link.
Registration State
The indication of the result of the SM’s network entry attempt:
Successful: SM registration is successful
Failed: Out of Range: The SM is out of the AP’s configured
maximum range (Max Range parameter)
Failed: Capacity limit reached at AP: The AP is no longer
allowing SM network entry due to capacity reached
Failed: No Allocation on AP: The SM to AP handshaking failed
due to a misconfigured pre-shared key between the SM and AP
Failed: SW Version Incompatibility: The version of software
resident on the AP is older than the software version on the
SM
Failed: PTP Mode: ACL Policy: The AP is configured with PTP
Access set to MAC Limited and the SM’s MAC address is not
configured in the AP’s PTP MAC Address field
Failed: Other: The AP does not have the required available
memory to allow network entry
Session Time (hh:mm:ss)
This timer indicates the time elapsed since the SM registered
to the AP.
Wireless Security
This field indicates the security state of the AP to SM link.
Meets Reg Criteria
Yes: The scanned AP meets the Network Entry criteria defined
by the internal Network Algorithm.
No: The scanned AP does not meet the Network Entry criteria
defined by the internal Network Algorithm.
Summary of Contents for ePMP
