Chapter 7: Compliance with radio regulations
292
Brazil sp ecif ic inf o rm at io n
Br azil not if icat ion
For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the integrated
antenna or connectorized antenna shall not exceed 30 dBm (0.5 W).
The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting the
Country Code to “Brazil”, including after the module is reset to factory defaults.
Important Note: This equipment operates as a secondary application, so it has no rights against harmful
interference, even if generated by similar equipment, and cannot cause harmful interference on systems
operating as primary applications.
Br azil cer t if icat ion num b er s
The Anatel certification number for Brazil for the PMP/PTP 450i Series is 2426-15-7745.
A ust ralia No t if icat io n
900 MHz modules must be set to transmit and receive only on center channels of 920, 922, or 923 MHz to
stay within the ACMA approved band of 915 MHz to 928 MHz for the class license and not interfere with
other approved users.
After considering antenna gain (in dBi), 900 MHz modules’ transmitter output power (in dBm) must be set
to stay within the legal regulatory limit of 30 dBm (1 W) EIRP for this 900 MHz frequency band.
Reg ulat o ry Req uirem ent s f o r CEPT Mem b er St at es
(
)
When operated in accordance with the instructions for use, Cambium Wireless equipment operating in the
5.1 GHz and 5.4 GHz bands is compliant with CEPT Resolution 229 (REV. WRC-12).
Operating the 450 Platform Family in the bands 5150 to 5350 MHz and 5470 to 5725 MHz is granted
providing it is not causing interference to the existing primary services allocated to those bands.
For compliant operation in the 5250 to 5350 MHz band, the transmit power from the integrated antenna
or a connectorized antenna shall be limited to a maximum mean EIRP of 200 mW and a maximum mean
EIRP density of 10 mW/MHz in any 1 MHz band.
For compliant operation in the 5470 to 5725 MHz band, the transmit power shall be restricted to a
maximum of 250 mW with a maximum mean EIRP of 1 W and a maximum mean EIRP density of 50
mW/MHz in any 1 MHz band.
For compliant operation in the bands 5 250- 5 350 MHz and 5 470- 5 725 MHz, the 450 Platform Family
employs transmitter power control (TCP) and Dynamic Frequency Selection (DFS).
For EU member states, RLAN equipment in the 5.4GHz bands is exempt from individual licensing under
Commission Recommendation 2003/203/EC. Contact the appropriate national administrations for details
on the conditions of use for the bands in question and any exceptions that might apply. Also see
for further information.
Cambium Radio equipment operating in the 5470 to 5725 MHz band are categorized as “Class 1” devices
within the EU in accordance with ECC DEC (04)08 and are “CE” marked to show compliance with the
European Radio Equipment Directive (RED) 2014/53/EU. The relevant Declaration of Conformity can be
found at
http://www.cambiumnetworks.com/ec_dofc/
.
Summary of Contents for PMP 450 Series
