Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
35 of
50
Name
OID
MIB
Access
Syntax / Description
webAccess
.1.3.6.1.4.1.16
1.19.3.3.2.155
.0
WHISP-BOX-
MIBV2-MIB
Read-write INTEGER { httponly(0),
httpsonly(1),
httpandhttps(2)}
This variable determines if
only HTTP or HTTPs
connection are allowed.
0: HTTP only(default)
1: HTTPs Only
2: HTTP and HTTPs
3.17.7
SNMP
V
3
The SNMPv3 provides a secure method to perform SNMP operations. SNMPv3 IETF
STD062 has been added as part of release 13.3 and onwards. This standard provides
services for authentication, data integrity and message encryption over SNMP.
Note:
The SNMPv3 statistics page may not be displayed properly with Google
Chrome browser.
Some tables are missing in the SNMPv3 Statistics Page. The SNMPv3 Data
is present on the page, but it is not listed in tabular form.
Web Management Interface
The SNMPv3 for a radio (AP/SM) can be enabled in Security Mode tab under configuration
> Security page.
1)
Enable SNMPv3 for AP/SM in
Configuration > Security > Security Mode
tab.
Table 34
Enabling SNMPv3
Attribute
Meaning
SNMP
SNMPv2c only: This allows SNMPv2c agent only.
SNMPv3 only: This allows SNMPv3 agent only.
SNMPv2c and SNMPv3: This allows SNMPv2c and
SNMPv3 agents.
