Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
43 of
50
4
PROBLEMS AND LIMITATIONS CORRECTED
Table 39
System Release 13.4 problems and limitations corrected
Products
Affected
Tracking
Description
Resolution
CNUT
CPY-257
PMP430 SM is updated with
PMP 450 package only if
this is the first package in
the list of packages in
CNUT.
The problem has been resolved
in CNUT 4.8.1.
All
CPY-8723
AP/SM reboot when receives
malformed telnet packet
The problem has been resolved
in System Release 13.4 for
malformed telnet packet. This
was seen when it was
connected to an Internet
accessible IP address.
PMP 450
SM
CPY-8727
No traffic flow after radar
detections despite SM is “in
Session” state
The problem has been resolved
in System Release 13.4.
All
CPY-9498
Bridge table does not report
more than 255 MAC
addresses from SNMP
The problem has been resolved
in System Release 13.4.
PMP/PTP
450
CPY-10188
SNMP whispLinkTable
objects which have string
values of dBm, are required
in integer.
The problem has been resolved
in System Release 13.4.
PMP 450
AP
CPY-10202
Customers using Sync
Injectors may see timing
issues when the AP tries to
use the iGPS as a sync
source. Please contact
Cambium Customer Support
if you are having problems
in the area.
The problem has been resolved
in System Release 13.4.
All
CPY-10318
In some cases, Enabling and
Disabling of telnet may
require a reboot to take
effect.
The problem has been resolved
in System Release 13.4.
