Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
47 of
50
5
KNOWN PROBLEMS OR LIMITATIONS
Table 40
System Release 13.4 known problems and limitations
Products
Affected
Tracking
Description
PMP 450
AP 3.65
GHz FCC
CPY-344
When 3.65GHz APs are deployed in an ABAB configuration,
then if an AP is rebooted, it may trigger an LBT event once
due to interference from the back sector. But once the AP has
initialized and is synced with the back AP (and adjacent
sectors), it will operate normally.
PMP/PTP
CPY-10182
Unable to upload config file in https mode with Google
Chrome browser
PMP/PTP
CPY-10310
PMP or PTP 450 may have "XO trim at min diff" in event log.
Contact Cambium Customer support if this is occurring
repeatedly.
PMP 450
CPY-11340
In rare occasions, a 5 Ghz AP under high CPU utilization can
crash due to a CTIC error. Please contact Cambium support
if your AP exhibits this behavior.
PMP 450
CPY-10356
PMP 450 AP reports DES encryption on homepage when the
encryption is set to None on security page. This discrepancy
may lead users to think that DES is enabled on the AP, when
it is not.
PMP 450
AP 3.65/
3.5 GHz
CPY-10399
AP sync status page shows date as 00/00/0000 when getting
sync from on board GPS. Please use NTP on your APs for
Date and Time information.
PTP 450
5 GHz
CPY-10437
5.4 GHz BHS running 5 MHz Channel Bandwidth will not
register to BHM if they have both the 5.4 and the 5.7 band
selected. Select only the 5.4 band on the BHS to ensure a
timely registration.
PMP/PTP
450
CPY-10621
TheSNMP object
encryptionConfig
expects 0 for AES, 1 for
DES, and 2 for None, despite what the description for the
OID says.
All
CPY-10644
The DFS Status tab is only visible to SMs/BHS that are set to
a DFS Region.
PMP/PTP
450
CPY-10663
The LBT Status tab is only visible to SMs/BHS that are set to
a LBT Region.
