Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
14 of
50
Note:
If AP is running with 13.4 and transmitting at 1 KHz precision frequency,
the downgrade will be aborted.
If SM has ONLY 1 KHz precision frequencies selected in
Custom Radio
Frequency Scan Selection List
, the downgrade will be aborted. In
order to downgrade the radio successfully, at least one 50 KHz raster
frequency needs to be selected in
Custom Radio Frequency Scan
Selection List
.
AP and SMs will all need to be on at least release 13.4 to take advantage
of this feature.
SNMP
Table 8
Customer frequency list SNMP object
Name
OID
MIB
Access
Syntax / Description
addCustom
FreqList
.1.3.6.1.4.1.161.19.
3.3.2.53.0
WHISP-APS-
MIB2-MIB
read-write
Add Custom
Frequencies.
Frequencies list can
be separated by
commas. Max string
length entered can’t
exceed 128
characters.
RemoveCust
omFreqList
.1.3.6.1.4.1.161.19.
3.3.2.54.0
WHISP-APS-
MIB2-MIB
read-write
Remove Custom
Frequencies.
3.7
Extrapolated Link Test
This feature allows users to estimate the link capacity by sending few packets and
measuring link quality. This feature extrapolates the link capacity in terms of throughput
based radio quality during test. This is an approximation test to have minimal service
impact.
Note:
This is not supported for PMP/PTP 100
Web Management Interface
The test can be run from GUI menu
Tools
>
Link Capacity Test
by selecting
“
Extrapolated Link Test
” for Link Test Mode attribute.
