Release Notes
System Release 13.4
pmp-0979 - July 2015
Page
23 of
50
3.10
Disable SM authentication
This feature allows the user to disable authentication for SM connected via ICC. This option
is useful to achieve zero touch configuration if authentication is enabled on AP.
Note:
If a SM is connected to an AP via the ICC method, the SM will disable
bridging of customer traffic to enforce security.
Web Management Interface
The feature can be enabled or disabled configuration > security > Authentication Server
settings tab.
Table 15
Disable authentication for SM
Attribute
Meaning
Disable Authentication
for SM connected via ICC
Enabled: SM authentication is disabled when SM
connects via ICC (Installation Color Code).
Disabled: SM authentication is enabled.
SNMP
Table 16
PMP 430 SM registration SNMP object
Name
OID
MIB
Access
Syntax / Description
disableAuth
ForICCSM
.1.3.6.1.4.1.161.19
.3.1.1.226
WHISP-APS-
MIB
read-write
INTEGER
{disabled(0),
enabled(1)}
3.11
Interop SM Registration
This feature allows the user to control whether PMP 430 SMs are allowed to register to
PMP 450 APs. It adds a configuration option on the AP to reject registration from PMP 430
SM. By default, PMP 430 SM registrations are accepted. When this configuration option is
set to disabled, PMP 430 SM’s registrations fail with reject reason 8. This will cause SMs to
lock out the AP for 15 minutes.
