PMP 450 Configuration and User Guide
Task 12: Configuring a RADIUS server
pmp-0050 (May 2012)
2-123
Note, Aradial 5.3 has a bug that prevents ―remote device login‖, so doesn‘t support the user name and
password management feature.
Choosing Authentication Mode and Configuring for Authentication
Servers - AP
On the AP‘s Configuration > Security tab, select the
RADIUS AAA Authentication Mode
. The following
describes the other
Authentication Mode
options for reference, and then the
RADIUS AAA
option.
Disabled:
Requires no authentication. Any SM (except an SM that itself has been configured to
require
RADIUS authentication by enabling Enforce Authentication as described below) will be allowed to
register to the AP.
Authentication Server:
Authentication Server in this instance refers to BAM or Prizm. Authentication
will be required for an SM to register to the AP. Only SMs listed by MAC address in the BAM or Prizm
database will be allowed to register to the AP.
AP Pre-Shared Key:
Canopy offers a pre-shared key authentication option. In this case, an identical key
must be entered in the Authentication Key field on the AP‘s Configuration > Security tab and in the
Authentication Key field on each desired SM‘s Configuration > Security tab.
RADIUS AAA:
To support RADIUS authentication of SMs, on the AP‘s Configuration > Security tab
select RADIUS AAA. Only properly configured SMs with a valid certificate will be allowed to register to
the AP.
When RADIUS AAA is selected, up to 3 Authentication Server (RADIUS Server) IP addresses and Shared
Secrets can be configured. The IP address(es) configured here must match the IP address(es) of the RADIUS
server(s). The shared secret(s) configured here must match the shared secret(s) configured in the RADIUS
server(s). Servers 2 and 3 are meant for backup and reliability, not splitting the database. If Server 1 doesn‘t
respond, Server 2 is tried, and then server 3. If Server 1 rejects authentication, the SM is denied entry to the
network, and does not progress trying the other servers.
The default IP address is 0.0.0.0. The default Shared Secret is ―CanopySharedSecret‖. The Shared Secret can
be up to 32 ASCII characters (no diacritical marks or ligatures, for example).
Summary of Contents for PMP 450
