Task 12: Configuring a RADIUS
server
Chapter 2: Configuration and alignment
2-130
pmp-0050 (May 2012)
The SM is
not
configured for DHCP on its management interface. If DHCP is enabled and these attributes
are configured in the RADIUS server, the attributes will be ignored by the SM.
The SM management interface must be configured to be publically accessible. If the SM is configured to
have local accessibility, the management interface will still be assigned the framed addressing, and the SM
will become publicly accessible via the assigned framed IP addressing.
When using these attributes, for the addressing to be implemented by the SM operators must configure
Framed-IP-Address in RADIUS. If Framed-IP-Address is not configured but Framed-IP-Netmask and/or
Motorola-Canopy-Gateway is configured, the attributes will be ignored. In the case where only the
Framed-IP-Address is configured, Framed-IP-Netmask defaults to 255.255.0.0 (NAT disabled) /
255.255.255.0 (NAT enabled) and Motorola-Canopy-Gateway defaults to 0.0.0.0.
Table 57
RADIUS Vendor Specific Attributes (VSAs)
Name
Number
Type
Req
’
d
Value
SM GUI Page > Tab > Parameter
Default
Size
MS-MPPE-Send-Key
26.311.16
-
Y
-
-
-
-
MS-MPPE-Recv-Key
26.311.17
-
Y
-
-
-
-
Motorola-Canopy-LPULCIR
26.161.1
integer
N
0-20000 kbps
Configuration > Quality of Service > Low Priority Uplink CIR
0 kbps
32 bits
Motorola-Canopy-LPDLCIR
26.161.2
integer
N
0-20000 kbps
Configuration > Quality of Service > Low Priority Downlink CIR
0 kbps
32 bits
Motorola-Canopy-HPULCIR
26.161.3
integer
N
0-20000 kbps
Configuration > Quality of Service > Hi Priority Uplink CIR
0 kbps
32 bits
Motorola-Canopy-HPDLCIR
26.161.4
integer
N
0-20000 kbps
Configuration > Quality of Service > Hi Priority Uplink CIR
0 kbps
32 bits
Motorola-Canopy-HPENABLE
26.161.5
integer
N
0-disable, 1-enable
Configuration > Quality of Service > Hi Priority Channel
Enable/Disable
0
32 bits
Motorola-Canopy-ULBR
26.161.6
integer
N
0-50000+ kbps
Configuration > Quality of Service > Sustained Uplink Data Rate
dependent on radio feature
set
32 bits
Motorola-Canopy-ULBL
26.161.7
integer
N
0-50000+ kbps
Configuration > Quality of Service > Uplink Burst Allocation
dependent on radio feature
set
32 bits
Motorola-Canopy-DLBR
26.161.8
integer
N
0-50000+ kbps
Configuration > Quality of Service > Sustained Downlink Data
Rate
dependent on radio feature
set
32 bits
Motorola-Canopy-DLBL
26.161.9
integer
N
0-50000+ kbps
Configuration > Quality of Service > Downlink Burst Allocation
dependent on radio feature
set
32 bits
Summary of Contents for PMP 450
