Task 4: Configuring General and Unit
settings
Chapter 2: Configuration and alignment
2-48
pmp-0050 (May 2012)
Attribute
Meaning
Ethernet Link Enable/Disable
Specify whether to enable or disable Ethernet/802.3
connectivity on the wired port of the SM. This parameter has
no effect on the wireless link. When you select
Enable
, this
feature allows traffic on the Ethernet/802.3 port. This is the
factory default state of the port. When you select
Disable
,
this feature prevents traffic on the port. Typical cases
of when you may want to select
Disable
include:
The subscriber is delinquent with payment(s).
You suspect that the subscriber is sending or flooding
undesired broadcast packets into the network, such as when
a virus is present in the subscriber's computing device.
the subscriber's home router is improperly configured.
Region Code
This parameter allows you to set the region in which the
radio will operate. When the appropriate region has been set,
the radio automatically implements the applicable required
Dynamic Frequency Selection (DFS) standard.
The slave radio automatically inherits the DFS type of the
master. This behavior ignores the value of the
Region Code
parameter in the slave, even when the value is
None
.
Nevertheless, since future system software releases may read
the value in order to configure some other region-sensitive
feature(s), this parameter should always be set to the value
that corresponds to the local region.
Webpage Auto Update
Enter the frequency (in seconds) for the web browser to
automatically refresh the web-based interface. The default
setting is 0. The 0 setting causes the web-based interface to
never be automatically refreshed.
Summary of Contents for PMP 450
