PMP 450 module essential information
Default IP Address for Management GUI Access
169.254.1.1
Default Administrator Username
admin
Default Administrator Password
(no password)
Software Upgrade Procedure
See
“Updating the software version and using
CNUT” in the PMP 450 Configuration and User
Guide
Resetting to Factory Defaults (2 options)
1.
On the radio GUI, navigate to
Configuration
,
Unit Settings
and select
Set to Factory
Defaults
OR
2.
On the radio GUI, navigate to
Configuration
,
Unit Settings
and enable and save option
Set to
Factory Defaults Upon Default Plug
Detection
. When the unit is powered on with a
default/override plug (see section “Acquiring the
Override Plug” in the PMP 450 Configuration
and User Guide) the radio will be returned to its
factory default settings.
ii
pmp-0047 (March 2014)
Summary of Contents for PMP 450
