PMP 450 Planning Guide
Glossary
Equipment specifications
This section contains specifications of the AP, SM, associated supplies required for PMP 450 installations.
AP specifications
The PMP 450 AP conforms to the specifications listed in
. These specifications apply to all PMP 450
product variants (except where noted).
Table 62 Connectorized AP physical specifications
Category
Specification
Product
Model
Number
2.4 GHz
C024045A001A, C024045A003A
3.5 GHz
C035045A001A, C035045A002A, C035045A003A, C035045A004A
3.6 GHz
C036045A001A, C036045A002A, C036045A003A, C036045A004A
5 GHz
C054045A001A, C054045A002A, C054045A003A
Spectrum
Channel
Spacing
5 MHz
10 MHz
20 MHz
channel
bandwidth
Configurable on 2.5 MHz increments (2.4GHz, 5 GHz)
Configurable on 50 kHz increments (3.5 GHz and 3.6 GHz)
Frequency
Range
2.4 GHz
2400 – 2483.5 MHz
3.5 GHz
3300 – 3600 MHz (dependent upon Region Code setting)
3.6 GHz
3650 – 3700 MHz (dependent upon Region Code setting)
5 GHz
5470 – 5875 MHz (dependent upon Region Code setting)
Channel Width
5 MHz (2.4 GHz, 3.5 GHz, 3.6 GHz and 5.8 GHz only), 10 MHz or 20 MHz
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer
2x2 MIMO OFDM
Ethernet Interface
10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
Protocols Used
IPv4, UDP, TCP, IP, ICMP, SNMP, HTTP, FTP, RADIUS
3-2
pmp-0047 (March 2014)
Summary of Contents for PMP 450
