Chapter 6: Configuration and alignment
Using the menu options
Page 6-52
Attribute
Meaning
Retain Passwords When set to Enabled, then after a factory default of the radio for any
reason, the passwords used for GUI and CLI access will not be defaulted
and will remain unchanged. The default value of this field is Disabled.
Caution
If the passwords cannot be retrieved after the factory default, access to
the radio will be lost/unrecoverable. This feature prevents unauthorized
users from gaining access to the radio for any reason, including theft.
Keep Passwords When the Keep Passwords checkbox is selected, the passwords used for
GUI and CLI access will not be defaulted and will remain unchanged.
This is one-time option, and it does not apply to factory default
procedures completed by power cycling (Reset Via Power Sequence).
Reset to Factory
Defaults
Use this button to reset the device to its factory default configuration.
Caution
A reset to factory default configuration resets all device parameters.
With the Slave device in default configuration it may not be able to
register to a Master device configured for your network.
Backup Technical Support File
Download The Backup Technical Support File is a compressed archive of the
applicable statitics and configuration parameters used by Cambium
Support for troubleshooting. This file is downloaded from the PTP 550
device to the accessing device.
Tools > Spectrum Analyzer page
Use the Spectrum Analyzer page to measure signal levels of frequencies across the full range
of the device or in a custom range.
