Chapter 5: Installation
Installing the ODU and top LPU
3 (a) For back-to-back LPU mounting, fix the ODU to the pole using the LPU.
(b) For separate LPU mounting, fix the ODU to the pole using the bracket strap.
(a) Back-to-back LPU:
(b) Separate LPU:
Caution
Do not reverse the ODU bracket strap,
as this arrangement may lead to failure
of the assembly:
4 Adjust the elevation (E) and azimuth (A) of the unit to achieve initial alignment. Tighten all three
M8 ODU bracket bolts to a torque setting of 14 Nm (11 lb ft). Do not over-tighten the bolts, as
this may lead to failure of the assembly:
Page
5-8