Chapter 6: Configuration and alignment
System menu
Procedures:
•
Review and update the attributes: Layer 2 and Priority Scheme (
•
To use IEEE 802.1Q classification rules, click Reset Default Priority Mappings.
•
To save changes, click: Submit Updated Configuration.
Note
Priority mapping must be configured the same at both Master and Slave units on the
wireless link.
Table 74 QoS Configuration attributes
Attribute
Meaning
Bridge
The classification of each layer 2 control protocol (L2CP) to an egress
queue at the wireless port.
MRP
CFM
R-APS
EAPS
Priority Scheme
Ethernet: Classification is based on fields in the Ethernet header (Layer 2).
IP/MPLS: Classification is based on fields in the network header (Layer 3).
IP includes IPv4 and IPv6.
Unknown Protocol Only displayed when Priority Scheme is IP/MPLS.
The classification of unknown network protocols (that is, not IP or MPLS)
to an egress queue at the wireless port.
Page
6-32
