Chapter 6: Configuration and alignment
Aligning antennas
Disarming the units
When antenna alignment is complete, use this procedure to disarm both units in the link in order
to:
•
Turn off the audible alignment aid.
•
Enable adaptive modulation.
•
Fully enable spectrum management features (such as DSO, if configured).
•
Clear unwanted installation information from the various systems statistics.
•
Store the link range for fast link acquisition on link drop.
•
Enable higher data rates.
Note
After 24 hours, the units will be disarmed automatically, provided that they are armed
and that the link is up.
Procedure:
•
Select menu option Installation. The Disarm Installation page is displayed (
•
Click Disarm Installation Agent. The confirmation page is displayed (
Figure 105 Optional post-disarm configuration
Page
6-93