Chapter 2: System hardware
Ethernet cabling
Table 18 Drop cable part numbers
Cambium description
Cambium part number
1000 ft Reel Outdoor Copper Clad CAT5E
WB3175
328 ft (100 m) Reel Outdoor Copper Clad CAT5E
WB3176
Cable grounding kit
Copper drop cable shields must be bonded to the grounding system in order to prevent lightning
creating a potential difference between the structure and cable, which could cause arcing, resulting
in fire risk and damage to equipment. Optical cables do not require grounding.
One grounding kit (
) is required for each grounding point on the PSU, Aux and copper
SFP drop cables. Order cable grounding kits from Cambium Networks (
Caution
To provide adequate protection, all grounding cables must be a minimum size of 10
mm
2
csa (8AWG), preferably 16 mm
2
csa (6AWG), or 25 mm
2
csa (4AWG).
Figure 16 Cable grounding kit
Table 19 Cable grounding kit part numbers
Cambium description
Cambium part number
Cable Grounding Kits For 1/4" And 3/8" Cable
01010419001
Page
2-22
