manualshive.com logo in svg

Cambium Networks PTP 800 Series, User Manual

The Cambium Networks PTP 800 Series is a high-performance wireless broadband solution. To get the most out of your device, make sure to download the comprehensive User Manual from our website for free. Discover the full potential of your PTP 800 Series by following the step-by-step instructions provided in the manual available at 88.208.23.73:8080.

Share
Download
background image

 

 

phn- 2513_004v000 ( Oct  2012)

 

 

 

Accuracy 

While reasonable efforts have been made to assure the accuracy of this document, Cambium 
Networks assumes no liability resulting from any inaccuracies or omissions in this document, or 
from use of the information obtained herein. Cambium reserves the right to make changes to 
any products described herein 

to

 improve reliability, function, or design, and reserves the right 

to revise this document and to make changes from time to time in content hereof with no 
obligation to notify any person of revisions or changes. Cambium does not assume any liability 
arising out of the application or use of any product, software, or circuit described herein; 
neither does it convey license under its patent rights or the rights of others. It is possible that 
this publication may contain references to, or information about Cambium products (machines 
and programs), programming, or services that are not announced in your country. Such 
references or information must not be construed to mean that Cambium intends to announce 
such Cambium products, programming, or services in your country.  

Copyrights 

This document, Cambium products, and 3

rd

 Party software products described in this document 

may include or describe copyrighted Cambium and other 3

rd

 Party supplied computer programs 

stored in semiconductor memories or other media. Laws in the United States and other 
countries preserve for Cambium, its licensors, and other 3

rd

 Party supplied software certain 

exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any 
form, distribute and make derivative works of the copyrighted material. Accordingly, any 
copyrighted material of Cambium, its licensors, or the 3

rd

 Party software supplied material 

contained in the Cambium products described in this document may not be copied, reproduced, 
reverse engineered, distributed, merged or modified in any manner without the express written 
permission of Cambium. Furthermore, the purchase of Cambium products shall not be deemed 
to grant either directly or by implication, estoppel, or otherwise, any license under the 
copyrights, patents or patent applications of Cambium or other 3rd Party supplied software, 
except for the normal non-exclusive, royalty free license to use that arises by operation of law in 
the sale of a product.  

Restrictions 

Software and documentation are copyrighted materials. Making unauthorized copies is 
prohibited by law. No part of the software or documentation may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or translated into any language or computer language, 
in any form or by any means, without prior written permission of Cambium. 

License Agreements  

The software described in this document is the property of Cambium and its licensors. It is 
furnished by express license agreement only and may be used only in accordance with the 
terms of such an agreement.  

High Risk Materials  

Components, units, or 3

rd

 Party products used in the product described herein are NOT fault-

tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment 
in the following hazardous environments requiring fail-safe controls: the operation of Nuclear 
Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life 
Support, or Weapons Systems (High Risk Activities). Cambium and its supplier(s) specifically 
disclaim any expressed or implied warranty of fitness for such High Risk Activities. 

©  2012 Cam bium  Net w ork s Lim it ed. All Right s Reser ved. 

 

Summary of Contents for PTP 800 Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PTP 800 Series

GE SecoGear User Manual preview
SecoGear
Brand: GE Pages: 36
GE Power Break Installation Instructions Manual preview
Power Break
Brand: GE Pages: 8
IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Brand: IBM Pages: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 2
IBM F16 User Manual preview
F16
Brand: IBM Pages: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 192
Qlogic SANbox 5802V Supplementary Manual preview
SANbox 5802V
Brand: Qlogic Pages: 4
D-Link DES-3326SRM Product Manual preview
DES-3326SRM
Brand: D-Link Pages: 242
H3C S5170-EI Series Manual preview
S5170-EI Series
Brand: H3C Pages: 46
Amped Wireless APA2600M Installation And Configuration Manual preview
APA2600M
Brand: Amped Wireless Pages: 22
YA Fusion Z-7799 Instruction Manual preview
Fusion Z-7799
Brand: YA Pages: 47
UNICOM SmartGST-2600M Specifications preview
SmartGST-2600M
Brand: UNICOM Pages: 1
N-Tron NTSFP-LX-40 User Manual & Installation Manual preview
NTSFP-LX-40
Brand: N-Tron Pages: 20
Raritan MCD-LED17 series User Manual preview
MCD-LED17 series
Brand: Raritan Pages: 89
Avenview SW-DVI-2X4 User Manual preview
SW-DVI-2X4
Brand: Avenview Pages: 10
Lindy 38148 User Manual preview
38148
Brand: Lindy Pages: 6
Huanyu HR3 Series Installation And Operation Instruction Manual preview
HR3 Series
Brand: Huanyu Pages: 10

Brands by name

Popular brands

Load more brands