manualshive.com logo in svg

Cambium Networks PTP 800 Series, User Manual

The Cambium Networks PTP 800 Series is a high-performance wireless broadband solution. To get the most out of your device, make sure to download the comprehensive User Manual from our website for free. Discover the full potential of your PTP 800 Series by following the step-by-step instructions provided in the manual available at 88.208.23.73:8080.

Share
Download
background image

Cam bium  Net works end user license agreem ent  

Chapt er 3:   Legal inform at ion 

 

3- 18

 

 

phn- 2513_004v000 ( Oct  2012)

 

 

(d) If the Work includes a "NOTICE" text file as part of its     distribution, then any 
Derivative Works that You distribute must     include a readable copy of the attribution 
notices contained     within such NOTICE file, excluding those notices that do not     
pertain to any part of the Derivative Works, in at least one     of the following places: 
within a NOTICE text file distributed     as part of the Derivative Works; within the Source 
form or     documentation, if provided along with the Derivative Works; or,     within a 
display generated by the Derivative Works, if and     wherever such third-party notices 
normally appear. The contents     of the NOTICE file are for informational purposes only 
and     do not modify the License. You may add Your own attribution     notices within 
Derivative Works that You distribute, alongside     or as an addendum to the NOTICE text 
from the Work, provided     that such additional attribution notices cannot be construed     
as modifying the License. 

 You may add Your own copyright statement to Your modifications and may provide 
additional or different license terms and conditions for use, reproduction, or distribution of 
Your modifications, or for any such Derivative Works as a whole, provided Your use, 
reproduction, and distribution of the Work otherwise complies with the conditions stated 
in this License. 

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution 
intentionally submitted for inclusion in the Work by You to the Licensor shall be under the 
terms and conditions of this License, without any additional terms or conditions. 
Notwithstanding the above, nothing herein shall supersede or modify the terms of any 
separate license agreement you may have executed with Licensor regarding such 
Contributions. 

6. Trademarks. This License does not grant permission to use the trade names, 
trademarks, service marks, or product names of the Licensor, except as required for 
reasonable and customary use in describing the origin of the Work and reproducing the 
content of the NOTICE file. 

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, 
Licensor provides the Work (and each Contributor provides its Contributions) on an "AS 
IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or 
implied, including, without limitation, any warranties or conditions of TITLE, NON-
INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You 
are solely responsible for determining the appropriateness of using or redistributing the 
Work and assume any risks associated with Your exercise of permissions under this 
License. 

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including 
negligence), contract, or otherwise, unless required by applicable law (such as deliberate 
and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You 
for damages, including any direct, indirect, special, incidental, or consequential damages 
of any character arising as a result of this License or out of the use or inability to use the 
Work (including but not limited to damages for loss of goodwill, work stoppage, computer 
failure or malfunction, or any and all other commercial damages or losses), even if such 
Contributor has been advised of the possibility of such damages. 

Summary of Contents for PTP 800 Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PTP 800 Series

United Electric Controls 54 Series Assembly, Installation And Operation Instructions preview
54 Series
Brand: United Electric Controls Pages: 6
Kramer XL 1208V2 Specifications preview
XL 1208V2
Brand: Kramer Pages: 2
Enterasys RoamAbout RBT-4102-BG Installation Manual preview
RoamAbout RBT-4102-BG
Brand: Enterasys Pages: 72
DANLERS EZ CESR Installation Notes preview
EZ CESR
Brand: DANLERS Pages: 2
Hamlet XHUB330LAN User Manual preview
XHUB330LAN
Brand: Hamlet Pages: 4
cable matters 202046 Quick Start Manual preview
202046
Brand: cable matters Pages: 8
Nortel Passport 1424T Installing Manual preview
Passport 1424T
Brand: Nortel Pages: 46
Blackberry SWITCH DEVICE User Manual preview
SWITCH DEVICE
Brand: Blackberry Pages: 10
Greengate VNLW-P-1001-MV-N-W Installation Instructions Manual preview
VNLW-P-1001-MV-N-W
Brand: Greengate Pages: 2
Opencockpits BREAKERF Installation & User Manual preview
BREAKERF
Brand: Opencockpits Pages: 30
H3C S1850 Series Getting Started Manual preview
S1850 Series
Brand: H3C Pages: 19
Radiient Select-4 User Manual preview
Select-4
Brand: Radiient Pages: 4
PureLink PT-SW-HD41 User Manual preview
PT-SW-HD41
Brand: PureLink Pages: 12
Exsys EX-1113HMS Manual preview
EX-1113HMS
Brand: Exsys Pages: 14
Black & Decker Lights Out 90539953 Instruction Manual preview
Lights Out 90539953
Brand: Black & Decker Pages: 5
Kramer VS-2616 User Manual preview
VS-2616
Brand: Kramer Pages: 7
Belden HIRSCHMANN HiOS-2A User Manual preview
HIRSCHMANN HiOS-2A
Brand: Belden Pages: 66
RS 796-2015 Manual preview
796-2015
Brand: RS Pages: 8

Brands by name

Popular brands

Load more brands