Chapter 2: Packaging and Installation of Access Point
46
3. Slide the plastic cover over the exposed portion next to the mounted e430.
4. Connect Ethernet cable to the upper RJ-45 port labelled Eth1/PoE at the rear side of e430 to
provide connectivity. Use the other RJ-45 port labelled Pass-thru for any additional cable that
might need to pass through e430.
5. Align the two slots at rear side of e430 with two hooks on the bracket.
6. Secure e430 to the bracket with a screw at the bottom edge of e430 using standard Philips head
or Torx security screwdriver.