Instruction Manual
WRS-1060 Iphone 4 and 4s Viewfinder
1
WRS-1060
Viewfinder Iphone
®
4/4s Viewfinder
INSTRUCTION MANUAL
EN
Please read
this manual
carefully before
using the Cambo WRS-1060 holder!
CAUTION: Tighten the clamping knob with care, do not over tighten the clamp!
CAUTION: Before use ensure that the Iphone
®
is mounted correctly!
The Cambo WRS-1060 holder is compatible with the Apple
®
Iphone
®
4 and 4s.
WRS-1095 shoe mount adapter
WRS-1096 WRS-AE adapter
The WRS-1090 can be mounted directly to the Cambo WRS-
1200 series.
For camera’s that feature a accessory shoe mount, the WRS-
1095 shoe adapter can be used.
For the Cambo Anniversary Edition camera the WRS-1096
WRS-AE adapter can be used.
The centring pins ensure a correct alignment of the Iphone
®
holder.
First tighten the right screw
using a flat screw driver or a
long Allen key (3mm)
Flip the holder 90
⁰
by pressing
the
“lock A”, please tighten the
second screw.
Before inserting the Iphone
®
4/4s in the holder please loosen
the clamp by turning “knob B” counter-clockwise. When the
clamp part is all the way up, now you can gently insert the
Iphone
®
4/4s in the holder (as displayed in the image above).
When the Iphone
®
is fully inserted in the holder, please ensure
that the backside of the Iphone
®
is parallel to and touching the
holder. Now you can gently tighten “knob B”,
don’t over tighten
the clamp
!, this could damage your Iphone
®
.
Note
: when the volume knobs are pressed, the Iphone is not parallel to the holder, please adjust the alignment of the Iphone
®
.
Lock A
Knob B
