851D
azur
7
ENGLISH
The 851D is supplied with a Cambridge Audio
System remote control that operates both this
upsampling DAC/digital pre-amp and Cambridge
Audio 851 series and Stream Magic products.
Insert the supplied AAA batteries to activate.
The functions relevant to the 851D are as follows:
1. Standby/On
Switches the 851D between On and Standby mode.
2. Mute
Mutes the audio on the pre-amplifier. The mute
mode is indicated by MUTE appearing and the
volume level being replaced by two flashing dashes
in the display. Press again to cancel mute.
3. Bright
Adjust the backlight of the front panel display;
bright, dim or off.
4. Headphone volume
Increase or decrease the volume of the headphone
output.
5. Home
Press to return to main menu.
6. Volume
Increase or decrease the volume of the pre-
amplifier output.
7. Back
Press to go back to the previous menu item.
8. Navigation buttons
Press to navigate around the main menus.
9. Illuminate button
Press to illuminate the buttons on the remote.
10. Source buttons
D1-D6:
Press the corresponding source button to
select the digital source inputs.
Bluetooth (BT100):
Press to select bluetooth
source input using the BT100 dongle. To pair
devices, press and hold for a few seconds to initiate
the pairing function.
Note:
Disconnect one device before pairing
another, or turn the Bluetooth function off from the
currently connected device before pairing another.
USB (PC):
Press to select the USB audio source
input.
See later sections for more details.
11. Trigger
Press to override the current trigger output state, for example to turn a
power amplifier or projector on or off.
12. Filter/
ø
Press to cycle through different digital filter phase modes: Linear,
Minimum, Steep, Linear inverted, Minimum inverted and Steep inverted.
The corresponding LED will light up to show which filter has been
selected. These affect the analogue outputs only. See later section for
more details.
The following functions are
available via USB and Bluetooth
playback.
Note: These functions will depend on the
audio software installed on the host personal
computer or paired devices.
13. Play / Pause
Press the relevant button to play or pause a
track.
14. Skip
Right Skip
(
) – Press once to skip forward
by one track on the playlist.
Left Skip
(
) – Press once to skip backward
by one track on the playlist.
Remote control
1
2
3
4
5
7
6
14
14
8
9
13
6
10
11
12
