AP PART
No.
DRAWING NO
DESCRIPTION
QTY
COMMENTS
Final assembly
AP11879/3
Opus Control Box Powerswitch
1
Position in Place on the Front Panel
AP14819/1
Push Switch Bar Extension
1
Affix and glue to Power Bar
CD4P AB05a
Power Bar
1
Fitted to SW3 on main PCB
AP15512/1
Front Panel Insulation Sheet
1
Attach to main PCB with two tie-wraps
Tie-wraps (plastic ties) Width 2.5mm
2
Attach insulation strip to main PCB
PY592
AP10209/3
Cambridge Selector Knob Mk3 Silver
3
AP10224/1
Cambridge Knob Insert Mk2
3
Insert Into Selector Knobs
PY590
AP12750/2
Cambridge New Range Amp Volume Knob Silver
1
AP13361/1
A600 Volume Knob Blue Plastic Insert
1
Insert Into Volume Knob
AP13360/1
A600 Volume Knob Aluminium Skin
1
Glued and taped In Place On Volume Knob
M3 X 10 Pozi Pan Plastite
4
To fix rear panel to side panels
M2.6 X 6 Pozi Pan Machine Screw
12
To fix Bottom Panel To Side, Front And Rear Panels
M2.6 x ???
4
To fix Bottom Panel To Side Panels (at corners)
AP14865/1
Cambridge Azur 340A Microcontroller
Cableform
1
From Main PCB J2 to Front Panel PCB CN2
AP14896/1
Cambridge Azur 340A Volume Control
Cableform
1
From Front Panel PCB CN5 to Volume Pot Motor
AP15204/1
Cambridge Azur 340A Earth Lead
1
From earth pin of IEC Scoket (CN3) on main PCB to Chassis
earth stud
M4 Nut Standard
1
Used To Fix earth lead to earth stud
M4 Lock Washer
1
For above nut
LED wireform is attached to main PCB
Glue power LED into light-guide
Lidding
AP13340/1
Lidding Tape For Front And Rear Panels
2
Fix To The Correct Surfaces For Lid
AP13342/1
Lidding Tape For Side Panels
2
Fix To The Correct Surfaces For Lid
PY640
AP14161/1
340A Top Panel (Silver)
1
Position Top Of The Product
PY516
M2.6 X 6 C/S Torx Machine Screw (Silver)
8
To Affix Top Panel to plastic Inserts, Side, Rear and Front
Panel
Packaging
Serial Number Label, Blank (6.5X35.5mm)
1
print with serial number label and attached to rear panel
AP13612/1
Azur 2 Ridge Woven Bag
1
Pack 340A Unit Inside
AP13504/2
Poly Endcap Packaging
2
AP13613/1
Azur Woven Bag For Remote Control
1
Pack Remote Control Inside,
Azur Remote Control Complete. Model No RC-
340AC/540AC/640AC
1
Fit into Poly Endcap, buttons to face polystyrene, Packing in
Rebate Provided
AAA Alkaline Batteries
3
For Remote. Place In Instruction Manual Polybag
PY637
AP15509/1
340A Amp Instruction Manual
1
Polybag 173X260X4C mm
1
For Instruction Manual and Remote Batteries
1830mm AC IEC Power Cord Set BS Standard
Fused 3 AMP
1
Must Be Bs Approved
AP13505/1
Carton Packaging With Handle
1
Printed To Artwork AP13716/1
AP14696/1
Carton Label (Model No.)
1
For Box
Blue Tape Seal For Cambridge Carton
1
NOTES:
Issue 1 - 15.03.2004
Issue 2 - 23.04.2004
5